大 美女100%露出奶网站,久久精品国产亚洲AV成人浪潮,国产乱子夫妻XX黑人XYX真爽,国产欧美一级内射7乀,精品无码污污网站在线观看

行業新聞

制氮機廠家對于psa制氮機核心性能分析

來源:http://m.yczjsd.com.cn/   日期:2021-07-16   瀏覽量:0
TAG:山東制氮機,山東干燥機,山東螺桿鼓風機,山東空壓機,山東自動排水器
碳分子篩的性能:B.氮生產A硬度(立方米/TH)C的回收率(N2/空氣)%的堆積密度。碳分子篩的廠家以上指標已在工廠的標志,但只是作為一個參考數據,如何使碳分子篩的效率大化,這一過程氮制造商以及吸附高徑比有直接的關系,在保證分子篩的使用壽命是非常重要的:
Performance of carbon molecular sieve: B. nitrogen production a hardness (m3 / th) C recovery (N2 / air)%, bulk density. The above indicators of carbon molecular sieve manufacturers have been marked in the factory, but only as a reference data. How to maximize the efficiency of carbon molecular sieve is directly related to the nitrogen manufacturer and the ratio of height to diameter in this process, which is very important in ensuring the service life of molecular sieve
填充碳分子篩的技術:碳分子篩的吸附塔有特殊的填充技術,否則容易粉和導致失敗,我們可以發現在這個過程中,當壓縮空氣從高速吸附塔的底部,如果沒有特殊的氣體分布器,
Technology of filling carbon molecular sieve: the adsorption tower of carbon molecular sieve has a special filling technology, otherwise it is easy to powder and cause failure. We can find that in this process, when the compressed air flows from the bottom of the high-speed adsorption tower, if there is no special gas distributor,
濟南制氮機
通過空氣的影響,摩擦的分子篩,容易造成分子篩粉。在吸附塔分子篩不緊,使用一段時間后,沸石下沉緩慢減小,分子篩之間的間隙,如果沒有自動加注裝置和壓緊裝置,吸附塔將出現明顯的空間。當壓縮空氣進入塔的下部時吸附,分子篩將沖擊力流,在很短的時間內快速位移的發生,分子篩由于碰撞,摩擦和碰撞、吸附塔壁,這樣很容易使分子篩粉失敗。
Through the influence of air, friction of molecular sieve, easy to cause molecular sieve powder. When the molecular sieve in the adsorption tower is not tight, after a period of use, the zeolite sinking slowly decreases, and the gap between molecular sieves, if there is no automatic filling device and pressing device, the adsorption tower will appear obvious space. When the compressed air enters into the lower part of the tower for adsorption, the molecular sieve will impact force flow and move rapidly in a very short time. Because of collision, friction, collision and adsorption of the tower wall, the molecular sieve powder is easy to fail.
油氣,水在分子篩的影響:由于空氣中含有水和油,壓縮機后,如果沒有嚴格的空氣凈化處理,油和水碳分子篩吸附,解吸和困難,填充分子篩孔徑,分子篩由于“中毒”的失敗。所以在壓縮空氣進入吸附塔前設置嚴格的空氣凈化裝置,這是一個環使用壽命的重要分子篩。
Influence of oil, gas and water on Molecular Sieves: due to the presence of water and oil in the air, if there is no strict air purification treatment after the compressor, the oil and water carbon molecular sieves will be adsorbed, desorbed and difficult to fill the pore size of molecular sieves, and the molecular sieves will fail due to "poisoning". Therefore, the strict air purification device is set before the compressed air enters the adsorption tower, which is an important molecular sieve with long service life.
在分子篩水,雖然不是致命的,但分子篩吸附負載增加,影響的O2,CO2的吸附能力,使壓縮空氣干燥除水,是提高篩吸附能力和穩定的不可忽視的分子的問題。
In molecular sieve water, although not fatal, but molecular sieve adsorption load increase, affect the adsorption capacity of O2, CO2, make compressed air dry to remove water, is to improve the adsorption capacity and stability of molecular sieve can not be ignored.

上一篇:干燥設備選型有哪些基本原則?
下一篇:空壓機設備出現過載現象的原因是什么?