行業新聞

螺桿鼓風機潤滑脂如何更換？

來源：http://m.yczjsd.com.cn/ 日期：2021-06-28 瀏覽量：0

TAG：山東制氮機，山東干燥機，山東螺桿鼓風機，山東空壓機，山東自動排水器

螺桿鼓風機潤滑脂經過一段時間的使用，會發生性能老化和泄露消耗，因此需要及時進行補充或更換。羅茨鼓風機使用潤滑脂，通常每3個月左右補充一次，是否需要更換，應視潤滑脂的質量狀況而定。主要判斷依據：

After a period of use, the grease of screw blower will have performance aging and leakage consumption, so it needs to be supplemented or replaced in time. Roots blower uses grease, which is usually replenished every three months. Whether it needs to be replaced depends on the quality of grease. Main judgment basis:

（1）檢驗螺桿鼓風機是否混用太多的硬粒雜志。檢驗時，用手指取少量潤滑脂進行捻壓，憑感覺可以判斷;

(1) Check the screw blower for mixing too many hard particles. During inspection, take a small amount of grease with your fingers for twisting and pressing, which can be judged by feeling;

（2）檢驗螺桿鼓風機是否氧化變質。如果已經氧化變質，從外觀上就可分辨得出。這時潤滑脂的顏色變黑或者加深，并且表面會形成較硬的膠膜。

(2) Inspect the screw blower for oxidation and deterioration. If it has been oxidized, it can be distinguished from the appearance. At this time, the color of the grease becomes black or deepened, and a hard film will form on the surface.

（3）不同種類的脂不能混合，新脂、舊脂不能混合，因此更換潤滑脂時，應將廢脂徹底清除，然后填入新脂。

(3) Different kinds of grease can't be mixed, new grease and old grease can't be mixed, so when changing grease, the waste grease should be completely removed, and then filled with new grease.

（4）潤滑脂的填充應當適量。填充過少，會造成潤滑不夠。填充過量，潤滑脂過度攪拌、急劇升溫，又造成分油、分解與泄露。

(4) The filling of lubricating grease should be appropriate. Too little filling will result in insufficient lubrication. Overfilling, excessive stirring and sharp temperature rise of grease cause oil separation, decomposition and leakage.

螺桿鼓風機的潤滑脂要及時的補充和更換，保證螺桿鼓風機的正常使用。想要了解更多精彩內容可以直接點擊：http://m.yczjsd.com.cn會定期呈現內容。

The grease of screw blower should be supplemented and replaced in time to ensure the normal use of screw blower. If you want to know more, you can click: http://m.yczjsd.com.cn Content is presented on a regular basis.s.

上一篇：空壓機頻繁加卸載原因及故障分析
下一篇：空壓機頻繁加卸載原因及故障分析

相關新聞

空壓機自動排氣閥失靈的原因制氮機中碳分子篩裝填需要注意什么制氮機分子吸附系統和其它吸附系統有什么不同？空壓機調節閥出現的幾種故障及解決方式怎么判斷羅茨風機齒輪磨損程度？空壓機進氣膠彎頭的重要性教你三招對付空氣自動排水器里的積水！壓縮空氣自動排水器的應用經驗

相關產品